 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER MT3508G THRU MT3516G FEATURES * * * * VOLTAGE RANGE CURRENT 1600 Volts 35 Amperes MT-35 1.137(28.9) 1.118(28.4) + Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation Glass passivated chip junction Surge overload rating to 400 ampers High temperature soldering guaranteed: 260/10 seconds,/5 lbs tension 1.137(28.9) 1.118(28.4) 0.208 (5.3) 0.196 (5.0) 0.65(16.5) 0.61(15.5) - 0.980(24.9) 0.94(23.9) MECHANICAL DATA * * .322 (8.2) .307 (7.8) * * Case:Epoxy, Molded Plastic with heaksink integrally Mounted in the bridge encapsulation. Mounting Position: Bolt down on heatsink with silicone Thermal compound between bridge and mounting Surface for maximum heat transfer efficiency Mounting Torque: 20 in,lbs max Weight: 0.706 ounce, 20 gram 0.933(23.7) 0.787(20.0) 0.033 (0.84) .25 (6.4) .25 (6.3) 0.028 (0.71) 0.07(1.85) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS * * * Ratings at 25 ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% MT3508G SYMBOLS Peak Repetitive Reverse Voltage VRRM 800 Working Peak Reverse Voltage VRMS 800 Maximum DC Blocking Voltage VDC 800 Maximum Average Forward Rectified Output Current, at TC=55 (Note 2) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 17.5A Maximum DC Reverse Current at rated DC blocking voltage per element TA=25 Typical Thermal Resistance per Element Isolation Voltage from case to lug Operating and Storage Temperature Range MT3512G MT3516G 1200 1200 1200 35 400 1030 1.2 5.0 2.0 2500 (-55 to +150) 1600 1600 1600 UNIT Volts Volts Volts Amps Amps A2s Volts Amps /W I(AV) IFSM I2 t VF IR RJC VISO TJ ,TSTG VAC Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2.Unit mounted on 11.8"x11.8"x0.6" thick(300x300x15mm) Copper plate. E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER MT3508G THRU MT3516G VOLTAGE RANGE CURRENT 1600 Volts 35 Amperes FIG. 1- TYPICAL FORWARD CURRENT DERATING CURVE 35 35 FIG. 2- TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 30 Mounted on A 11.8"x11.8"x0.06" Thick (30x30x0.15cm) Copper Plate 20 30 25 20 Mounted on A 12" x12"x0.25" Thick (30.3x30.3x0.635cm) Al Plate 15 10 5 0 0 25 50 75 100 125 150 175 10 60Hz Inductive or Resistive Load 60Hz Inductive or Resistive Load 0 0 25 50 55 75 100 125 150 175 CASE TEMPERATURE () AMBIENT TEMPERATURE, () FIG. 3- TYPICAL INSTANTANEOUS FORWARS CHARACTERISTICS 1000 100 80 60 40 FIG. 3- MAXIMUM POWER DISSIPATION INSTANTANEOUS FORWARD CURRENT, (A) 100 AVERAGE POWER DISSIPATION OF BRIDGE (W) 20 10 8.0 6.0 4.0 10 1.0 2.0 60Hz Inductive or Resistive Load T j =25 PULSE WIDTH=300s 1% DUTY CYCLE 0.1 0.4 1.0 0 5 10 15 20 25 30 35 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 AVERAGE OUTPUT CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com |
Price & Availability of MT3512G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |